M12 circular connector and cable

The correct way to connect crimp type M12 aviation plug connector

/0 Comments/in , , , /by

In life, many electronic products use the M12 aviation plug connector. Usually the equipment is connected according to the crimped M12 aviation plug connector. At this time, there will be some difficulties.

GX12 Connector 4Pin Straight Standard Type Female Pulg to Male Socket Rear Bulkhead Solder Type For Cable

There are two possible problems. The first one will be the product quality problem of the RF connector products. Try to select some special type RF connectors for application. The second is that the crimping M12 aviation plug connector is connected in the wrong way.

What is the correct way to connect crimp type M12 aviation plug connector? The following is shared by Renhotec!

Crimp M12 aviation plug

The correct way to crimp the M12 aviation plug connector connection:

1. After the M12 aviation plug connector is crimped, it must be inspected by the outside to see if there are any defects. Confirm that the whole process of crimping is normal.

2. When the M12 aviation plug connector is crimped, the closed position should be appropriate, the aspect ratio should be accurate, and the connector need to be paid special attention to whether there is a wired knot and whether the standard air pressure is within a certain range.

3. When the M12 aviation plug connector is fully crimped, the actual operation of the crimping should be smooth, the interface should be accurate, and the supporting force of the cable should be appropriate.

4, Before using the M12 aviation plug connector to connect the machine equipment, you must first read the instructions for the use of the product, see the specifications of the RF connector and cable to comply with the relevant equipment and equipment connection regulations.

5, Pay special attention to the depth of the M12 aviation plug connector crimping 1. Since the crimping depth 1 of different machines and equipment is different, the M12 aviation plug connector does not pay special attention when crimping, which may cause the product to be unclear, and the customer may have serious damage when applied.

I think the characteristics and quality of the product are also critical when crimping the M12 aviation plug connector. Therefore, in addition to the special considerations of the M12 aviation plug connector, it is also necessary to pay attention to the characteristics of the commodity machine equipment. Product quality and other issues.

Picture Display of M12 Waterproof Connector

/0 Comments/in , , , /by

Today focus in sharing pictures of M12 Waterproof connector.Nowadays, there are many types of M12 Waterproof connector. Everyone’s requirements are improved that not same as before. It is suitable for the selection of M12 Waterproof connector for many people. Renhotec will give instructions to everyone.

Type of M12 Waterproof connector. Although there are some confusions about the types of M12 Waterproof connector, technically, the types of M12 Waterproof connector are mainly two essential ways of distinguishing:

According to the external configuration: ring and rectangle (section) according to the safe operating frequency: high frequency and high frequency (with 3MHz as the boundary) according to the difference, the coaxial output M12 Waterproof connector is classified into the ring, and the printed circuit M12 Waterproof connector is classified into the rectangle ( Historically, printed circuit M12 Waterproof connector have been extracted from rectangular M12 Waterproof connector),and today’s fashionable rectangular M12 Waterproof connector have a rectangular cross section that approximates a rectangular shape. The distinction between high frequency and high frequency and the frequency of radio waves is essentially intrinsic to each other.

As for the other types of M12 Waterproof connector, they can be distinguished by many different types according to their use, equipment, structure and characteristics. They are often found in the production of academic journals and manufacturers, but generally only for the sake of excellence and characteristics. The categorization still does not exceed the stated difference rules.

The M12 Waterproof connector are widely used in the application industry, including Led road lights, communication electronics, the Internet, machinery and equipment, boats and lighthouses, household appliances, etc. This development trend in the application manufacturing industry and the expansion of the use of indoor space, It does not push the technical maturity of aviation plugs at all times, making it move to a higher level. Up to now, the development trend of aviation plugs has become a product with complete product varieties, various types and specifications, various structural forms, technical professional orientation, significant manufacturing industry characteristics, and system standards for generalization.

I believe that everyone must have a deeper understanding of the M12 waterproof connector, Renhotec Group Ltd specializes in M12 aviation connector, M12 panel mount connector, M12 sensor connectors, M12 cable connector Etc., quality is guaranteed, please contact Renhotec to cooperate. Aviation connectors manufacturer: https://www.renhotecpro.com/

Definition and Advantages of M12 Connector

/0 Comments/in , , , /by

Imagine what would happen if there were no M12 connectors? At this time, the power circuit is permanently connected by continuous electrical conductors. For example, the electronic device must be connected to the switching power supply. It is necessary to connect the two sides of the power transmission line with the electronic device and the switching power supply according to a certain type (such as electric welding). Move firmly. At the same time, there are many inconveniences, both for manufacturing and application.

Take the car battery as an example.

Assuming that the rechargeable battery cable is fixed and fixed on the rechargeable battery, the automobile manufacturer increases the labor for installing the rechargeable battery, and increases the manufacturing time and cost. When the rechargeable battery must be replaced, the car must be sent to the repair center, the old one is removed, and the new one is soldered. Therefore, more labor costs are required. With the M12 connector, you can avoid a lot of inconvenience, buy a new rechargeable battery from the store, disassemble the old rechargeable battery, install the rechargeable battery, and connect to the M12 connector again.This simple example shows a bit of the M12 connector. It makes design and processing easier and more flexible, reducing manufacturing and maintenance costs.

So, what is the definition of the M12 connector? M12 connector, CONNECTOR. China also calls it the M12 connector, power plug and power outlet. Usually refers to the M12 electrical connector. That is, the components of the two active components are connected to transmit a current amount or a data signal.

The M12 connector is a component that is often touched by electronic engineering professionals. Its function is very simple: in the power circuit is blocked or isolated in the middle of the power supply circuit, set up a road bridge to communicate, and then make the current flow, so that the power circuit to establish a reservation. The M12 connector is an indispensable component in electronic products. You will find one or several M12 connectors along the loop of the current flow. M12 connector mode and structure are in a variety of ways, with the use of constructor, frequency, output power, application environment, etc., there are a variety of different ways M12 connector.

For example, the M12 connector for the lights on the court and the M12 connector for the hard drive, and the M12 connector for the pilot rocket are not the same. However, no matter which M12 connector, you must ensure that the current is flowing smoothly and consistently. In particular, the M12 connector is not limited to the amount of current. In today’s rapid development of technology, in the fiber-optic system software, the plasmid carrier that transmits the data signal is light, and the laminated glass and plastic replace the general power supply. The power line in the circuit, but the M12 connector is also used in the optical signal path, their function is the same as the power circuit M12 connector. Because people only pay attention to the power circuit M12 connector, therefore, the content of this course will be closely related to Molex’s products, and the power circuit M12 connector will be introduced in detail.

Understand the basics of the M12 connector, and then the benefits of the M12 connector:

First, it is conducive to upgrading: With the advancement of technology, with the M12 connector can upgrade the meta-components, replace the old with new, more robust meta-components;

Second, improve the coordination ability of the design scheme: the application of the M12 connector enables the technical engineers to have greater coordination ability when designing the solution and integrating the new product, and when using the component to form the system software.

Third, improve the processing: M12 connector simplifies the entire assembly process of electronic equipment, and also simplifies the whole process of mass production.

Fourth, easy to overhaul: If an electronic device component is invalid, with the M12 connector can quickly replace the invalid component;

c

I believe that everyone must have a deeper understanding of the M12 connector, Renhotec Group Ltd specializes in aviation connectors, waterproof connectors, sensor connectors, cable connectors, cable sockets, automotive wiring harnesses, circular connectors, waterproof panel mount sockets, Etc., quality is guaranteed, please contact Renhotec to cooperate. Aviation connectors manufacturer: https://www.renhotecpro.com/

New Energy M12 Circular Connector’s Future Development

/0 Comments/in , , , /by

With the development of the times, environmental protection is a recognized problem in the world. As a country of development, China has formulated a policy of one belt and one road. Environmental protection must take the lead. New energy M12 Circular Connector are also closely followed to help environmental protection.

Exhaust emissions is a big problem. Due to the improvement of the economic level, the number of household cars continues to increase, resulting in serious air pollution. The state has racked its brains and thought of various methods, which cannot solve the problem fundamentally. Finally, the technology of developed countries is used to manufacture new energy. Automobiles, do not burn diesel, gasoline and other mixed oils, improve the use of old train coal. Exhaust emissions are never allowed and air is polluted.

By electromagnetically carrying current, the driving system is driven, so that the cost is low and the efficiency is high, which is the direction of development in the future. When it comes to the use of new energy M12 Circular Connector, there are many places. Electric vehicles, electric vehicles, buses, motor trains, and ship terminals are all inseparable from current transmission, including signal transmission, convenient and reliable, and M12 Circular Connector connection. The device plays a decisive role. It can be imagined how many M12 Circular Connector are needed for a group of motor vehicles. As far as the current situation is concerned, the development of new energy vehicles is bright, that is to say, the demand for M12 Circular Connector should be said. It is quite a lot, and the future of development is infinite!

I believe that everyone must have a deeper understanding of aviation plugs, Renhotec Group Ltd., specializing in aviation plugs, waterproof connectors, sensor connectors, cable connectors, automotive wiring harness, circular connectors, waterproof circular connector, etc., the delivery time and quality are guaranteed, please contact to cooperate. Renhotec Aviation connectors manufacturer: https://www.renhotecpro.com/

Electromagnetic Interference Requirements for M12 Sensor Connector

/0 Comments/in , , , /by

In modern electrical and electronic equipment, the density of the M12 Sensor Connector

contacts and the increasing functionality between them imposes severe restrictions on the electromagnetic interference of the M12 sensor connector.

Through long-term use in the market, M12 sensor connector is often finished with a metal casing, which can prevent internal electromagnetic energy radiation or interference from external electromagnetic fields. Or solve the preliminary interference by connecting the shield mesh through the rear shield ring of the M12 sensor connector. At low frequencies, only magnetic materials can significantly shield the magnetic field. At this time, there is a certain regulation on the electrical continuity of the metal casing, that is, the casing contact resistance is limited to a certain range.

At present, with the development of science, the image should be clearer, and the noise should achieve the best effect. A filter is added inside M12 sensor connector, that is, the filter line is connected with the ground to meet the technical requirements.

Through the reading of the above content, I believe that everyone must have a deeper understanding of M12 sensor connector, Renhotec Group Ltd offer M12 Sensor Connector and OEM customized connectors& cable assemblies. More details please check : https://www.renhotecpro.com/

Advantages of fiber optic M12 aviation plug

/0 Comments/in , , , /by

In the future, fiber-optic air plugs will become smaller and smaller, and the cost will be lower and lower, while the performance requirements are getting higher and higher. In the future, a variety of newly developed fiber optic aviation plugs will be used together with traditional aviation plug connectors to provide useful help for China’s communications reconnaissance industry. Let’s talk about the performance parameters of using fiber optic aviation plugs:

M12 8芯航空接头母头弯式装配式螺丝锁线 10PCS

The performance of fiber optic connectors is first of all optical performance, in addition to the interchangeability, repeatability, tensile strength, temperature and number of insertions and removals of fiber optic aviation plugs.

1. Optical performance of fiber optic aviation plugs

The optical performance requirements for fiber optic aviation plugs are mainly the two most basic parameters of insertion loss and return loss.

Insertion loss (InsertionLoss) is the loss of the effective optical power of the link caused by the conduction of the connector. The smaller the insertion loss, the better, and the general requirement should be no more than 0.5dB.

ReturnLoss (ReflectionLoss) refers to the ability of the connector to suppress the reflection of the link optical power, and its typical value should be no less than 25dB. In the practical application of the connector, the surface of the pin has been specially polished to make the return loss larger, generally not less than 45dB.

2. Optical fiber aviation plug interchangeability and repeatability

The fiber optic connector is a universal passive device. For the same type of fiber optic connector, it can be used in any combination and can be used repeatedly. Therefore, the additional loss of the lead is generally less than 0.2 dB.

3, fiber optic aviation plug tensile strength

For a good fiber optic aviation plug, the tensile strength is generally required to be no less than 90N.

4, fiber optic aviation plug temperature

Generally, the fiber optic connector must be able to operate at temperatures between -40oC and +70oC

The Market Development and Trend Prospects of M12 Connector

/0 Comments/in , , , /by

At present, M12 connector is one of the most popular and widely used connector in the domestic market. What is the future development prospect of M12 connector? Let’s analyze it briefly now.

First of all, the M12 connector manufacturing process is becoming more and more dexterous. In order to maximize the role of the M12 connector, it can meet the needs of different industries. At present, the M12 connector is modularized in production and design, which makes the M12 more adaptable. In addition, in order to meet the needs of the market, the M12 connector now offers a variety of termination methods including crimping or through-hole reflow technology, surface mount, etc., greatly improving the flexibility of use. What’s more, the M12 connector market is even more prominent in achieving the goal of quality and standardization.

According to statistics, the current domestic connector market’s annual growth rate reaches about 30%, which proves that the market demand for connectors is very large, but the number of enterprises with high-end technology is not large, with independent intellectual property rights. It is even less, so there is still a big gap in product competitiveness compared with similar industries in foreign countries. Therefore, in order to achieve the goal of changing from mass to quality for the development of M12 connectors, more and more local companies are aware of this problem. And began to work hard to reform enterprise product technology, innovation and technology to expand business, learn foreign advanced technology to achieve the world’s leading technology, improve their own quality and standards. This kind of crisis awareness of enterprises is worthy of recognition, and it is also an important driving force to promote the development of M12 connector market to quality and standardization.

All in all, with the current M12 connector development market and huge demand, its development momentum is still quite strong and stable, and this is also a solid foundation for the further development of the M12 connector in the future. Although the industry has been optimistic about the future development prospects of M12 connectors, but one thing we can’t ignore is that China’s independent research technology in M12 connectors is still relatively lacking in many countries. Therefore, the company not only carries out reforms, but also continuously develops and innovates, and strives to introduce the M12 connector technology created by China into the industry and push it to the world.

Through the reading of this article, I believe that everyone must have a deeper understanding of the M12 connector, Shenzhen Renhotec Technology Electronics Co., Ltd., specializing in waterproof connectors, sensor connectors, cable connectors and cable sockets, automotive wiring harness, circular connectors, aviation plugs, waterproof sockets, etc. For any needs, please contact us directly at [email protected]. Or visit our website: www.renhotecpro.com