How to meet the installation requirements of aviation plugs:

  1. Ordinary sockets should be installed in a dry, dust-free place.
  2. The socket should be installed firmly. Since the socket is always charged, the installation height of the wall-mounted socket is not less than 1.3m from the ground, generally 1.5-1.8m, and the concealed socket allows for low installation, but the height from the ground is not less than 0.3m.
  3. For the aviation plugs in the same place, the installation height should be the same, the height difference should be no more than 5mm, and the sockets installed in rows should not be larger than 2mm.
  4. Socket power cords for high-power household appliances such as air conditioners and electric water heaters should be arranged separately from the power cords of the lamps. The sockets should not be shared with other household appliances. The power cable should be directly led out from the distribution box or bus. The wires used are generally copper core wires with a cross section of not less than 2.5 mm. The air conditioner should be a copper core wire with a section of not less than 4 square meters.
  5. 5.Concealed socket should have a special box, the cover should be straight and close to the wall. Surface mounted aerial plugs are to be mounted on wooden pallets and secured with two wood screws.
2 replies
  1. zvodret iluret
    zvodret iluret says:

    I together with my buddies were actually going through the good thoughts located on your web page and so the sudden developed an awful feeling I had not expressed respect to the web site owner for those strategies. Those ladies ended up as a consequence joyful to read through all of them and now have unquestionably been loving these things. Thank you for truly being quite kind and also for obtaining these kinds of fantastic subject areas most people are really desirous to learn about. My very own honest regret for not expressing appreciation to you sooner.

    Reply

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *