M Series Connector Decomposition Detection’s Precautions

Decomposition detection of the M Series Connector is one of the necessary steps, which can avoid the problems in the use of the M Series Connector. Today, Renhotec will introduce the breakdown test of the M Series Connector Precautions.

When testing the used M Series Connector, the requirements shall be reduced on the basis of the relevant scale of the product and the use of the imitation. The M Series Connector used shall be intact and the functions shall be qualified; the probes shall meet the scale requirements, otherwise Easy to cause damage to the contacts.

When removing the back shell that has been connected to the harness or cable, do not twist the coupling nut on the shell before loosening the cable clamp, otherwise the M Series Connector core wire or end point may be damaged. Before tightening the coupling nut, loosen the thread locking device (anti-loose screw, anti-loose ring, fuse, etc.)

If it is necessary to disassemble the M Series Connector, the operator should fully understand the pre-installation premise and method of the M Series Connector, and disassemble the M Series Connector according to the requirements of the product use copy. Special attention should be paid to whether there are missing components and whether the assembly is in place. Whether the serial number of the contact is accurate or whether the rubber parts are twisted or not. The assembled M Series Connector should be tested for connectivity to ensure interchangeability.

Through the reading of the above content, I believe that everyone must have a deeper understanding of M Series Connector, Renhotec Group Ltd offer M Series Connector and OEM customized connectors& cable assemblies. More details please check : http://www.renhotecpro.com/

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *